GOST 17679-80 Type 2 Lightweight clamps for fastening pipelines and cablesClamps in accordance with GOST 17679-80 – the design of this product consists of a metal tape bent in for girth of the required surfaces with holes at the ends of the tape for clamping by means of fastening the nut and bolt (screw), they can be used to fasten pipelines of various diameters, highways and systems on walls and ceilings.
Description of the design of the product, its features
The structure of the clamp consists of a tape with holes in the ends.
Material of manufacture: from steel grades 20, 25, 12X18H10T.
Coating of the clamps with zinc, chromium, nickel , cadmium, etc. is performed in our own electroplating workshop. A multilayer coating is also available, such as copper-nickel (MN) or copper-nickel-chromium (MNX.6). After such processing, the clamps serve reliably in aggressive environments.
An example of a symbol for a clamp of type II, 40 mm in diameter, 20 mm wide, made of steel grade 20, with coating Ц15хр:
Example of designation: Clamp ТII-40-20-20-Ц15.хр GOST 17679-80
The same, made of steel grade 20, coated with Кд15.хр :
Example of designation: Clamp TIl-40-20-20-Kd15.хр GOST 17679-80
The same, from steel grade 12Х18Н10Т, coated with Chem.Pas: p>
Example of designation: Clamp TII-40-20-12X18H10T-Chem.Pas GOST 17679-80
The same, from steel grade 20 without coating:
Example of designation : Clamp TII-40-20 GOST 17679-80
These clamps are used in many industries. An increased demand for products, in particular, is observed in the aircraft and machine-building industries, as well as in construction, energy and metalworking, where such clamps are used for reliable pipelines of various systems to walls and ceilings.