GOST 17679-80 Type 3 Lightweight clamps for fastening pipelines and cablesClamps in accordance with GOST 17679-80 – the design of this product consists of a metal tape bent in for girth of the required surfaces with holes at the ends of the tape for clamping by means of fastening the nut and bolt (screw), they can be used to fasten pipelines of various diameters, highways and systems on walls and ceilings.
Description of the design of the product, its features
The structure of the clamp consists of a tape with holes in the ends.
Material of manufacture: from steel grades 25, 12X18H10T.
Coating of the clamps with zinc, chromium, nickel, cadmium and others are carried out in our own electroplating workshop. A multilayer coating is also available, such as copper-nickel (MN) or copper-nickel-chromium (MNX.6). After such processing, the clamps serve reliably in corrosive environments.
An example of a symbol for a clamp of type III, with a diameter of 14 mm, a width of 12 mm, a diameter of 6.6 mm , made of steel grade 25, coated with Ts15.хр:
Example of designation: Clamp ТKIII-14-12-6,6-25-Ц15.хр GOST 17679-80
To the same, made of steel grade 25, coated with Кд15.хр:
Example of designation: Clamp ТKIII-14-12-6,6-25-Кд15.хр GOST 17679-80
The same, made of steel grade 12X18H10T, coated with Chem.Pas:
Example of designation: Clamp TKIII-14-12-6,6-12X18H10T-Chem.Pas GOST 17679-80
The same, made of aluminum alloy D16.A.M, coated with An.Ox.xr:
Example of designation: Clamp TKIII-14-12-6,6-D16.A.M-An .Ox.Нхр GOST 17679-80
Product application areas
These clamps are used in many industries. An increased demand for products, in particular, is observed in the aircraft and machine-building industries, as well as in construction, energy and metalworking, where such clamps are used for reliable pipelines of various systems to walls and ceilings.