GOST 17679-80 Type 5 Lightweight clamps for fastening pipelines and cables.Clamps in accordance with GOST 17679-80 – the design of this product consists of a metal tape bent into to grip the required surfaces with holes in the ends of the tape for clamping by means of fastening the nut and bolt (screw), they can be used to fasten pipelines of various diameters, lines and systems on walls and ceilings.
Description of the design of the product, its features strong >
The structure of the clamp consists of a tape with holes in the ends.
Material of manufacture: from steel grades 25, 12X18H10T.
Coating of the clamps with zinc, chrome, nickel, cadmium, etc. is performed in our own electroplating workshop. A multilayer coating is also available, such as copper-nickel (MN) or copper-nickel-chromium (MNX.6). After such processing, the clamps serve reliably in corrosive environments.
An example of a symbol for a clamp of type IV, 20 mm in diameter, made of steel grade 25, with Ts15 coating. хр:
Example of designation: Clamp ТKV-22-25-Ц15.хр GOST 17679-80
The same, from steel grade 25, coated with Kd15. хр:
Example of designation: Clamp ТKV-22-25-Кd15.хр GOST 17679-80
The same, made of steel grade 12Х18Н10Т, coated Chem. Pass:
Designation example: Clamp TKV-22-12X18H10T-Khim.Pas GOST 17679-80
The same, from aluminum alloy D16.A.M , with An.Ox.xr coating:
Designation example: Clamp TKV-22-D16.AM-An.Ox.Nhr GOST 17679-80
These clamps are used in many industries. An increased demand for products, in particular, is observed in the aircraft and machine-building industries, as well as in construction, energy and metalworking, where such clamps are used for reliable pipelines of various systems to walls and ceilings.