Description

GOST 24193-80 Collar clamps

Collar clamps according to GOST 24193-80 – the design of this product consists of two halves of a metal tape with holes at the ends, they can be piping to walls or ceilings.

Description of the product design and its features

The clamp structure consists of two plates, one of which is bent along the radius, and with holes at the ends. < / p>

Material of manufacture: from steel grades St3sp, St3kp.

Coating of clamps with zinc, chromium, nickel, cadmium, etc. is carried out in our own galvanic shop. A multilayer coating is also available, such as copper-nickel (MN) or copper-nickel-chromium (MNX.6). After such processing, the clamps serve reliably in corrosive environments.

GOST 24193-80.pdf

An example of a conventional designation of a collar for a pipe with an outer diameter of 45 mm made of steel grade St3kp:

Example of designation: Clamp 45 GOST 24193-80

The same, from steel grade St3sp:

Example of designation: Clamp 45- With GOST 24193-80

Applications of the product

These clamps are used in many industries. An increased demand for products, in particular, is observed in the aircraft and machine-building industries, as well as in construction, energy and metalworking, where such clamps are used for used in centrifugal molds for attaching latches to the mold.

ANALOGUES